THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

1994-2010 Dodge Ram 2500
1999-2003 Dodge Ram Van 2500
1994-2010 Dodge Ram 3500
1999-2003 Dodge Ram Van 2500
2011-2013 Ram 2500 (CHECK YOUR STUDS CAN BE EITHER 9/16" or 14x1.5)
2011-2013 Ram 3500 (CHECK YOUR STUDS CAN BE EITHER 9/16" or 14x1.5)

ADDITIONAL INFORMATION

• 4x Brand NEW Wheel Adapters Vehicle Bolt Pattern 8x6.5 Wheel Bolt Pattern 8x6.5 Hub Bore 130mm Thickness: 2 inch (each spacer) Thread Pitch: 9/16"
• T6 6061 Billet Wheel Adapters 10.9 Grade Steel Threads
• Mainly used to give your vehicle an agressive stance, and will help with any clearance issues (if present)
• CNC Machined Usings Aerospace Aluminum
• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 8x6.5 (8 on 6.5)
• Wheel Bolt Pattern: 8x6.5 ( 8 on 6.5)
• Hub Bore: 130mm
• Thread Pitch: 9/16" x 18
• Thickness: Each Spacer Measure 2" Thick

Vehicle Bolt Pattern: 8x6.5 (8 on 6.5)Titan Wheel Accessories