THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

1991-2004 Dodge Dakota
1998-2003 Dodge Durango
1993-2010 Dodge Viper
2015-2016 Dodge Viber

ADDITIONAL INFORMATION

• May NOT WORK with stock length studs. Extended Wheel Studs may be needed for proper installation
• Simple, bolt-on installation with minimal tools
• Spacers are Made of Forged Billet T6 6061 Aluminum

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You Can Cut Your Existing Studs To The Correct Length

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 6x4.5
• Hub Bore: 82.5mm
• Thickness: Each Spacer Measure 1/4" Thick
• May NOT WORK with stock length studs. Extended Wheel Studs may be needed for proper installation
• Simple, bolt-on installation with minimal tools

Vehicle Bolt Pattern: 6x4.5Titan Wheel Accessories