THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2006-2016 Hyundai Azera
2007-2016 Hyundai Elantra
2011-2016 Hyundai Equus
2009-2016 Hyundai Genesis
2010-2016 Hyundai Genesis Coupe
2009-2016 Hyundai Santa Fe
2006-2016 Hyundai Sonata
2003-2008 Hyundai Tiburon
2006-2016 Hyundai Tucson
2007-2016 Hyundai Veracruz
2001 Hyundai XG300
2002-2005 Hyundai XG350

2004-2009 Kia Amanti
2010-2016 Kia Forte
2006-2016 Kia Optima
2007-2010 Kia Rondo
2002-2016 Kia Sorento
2010-2016 Kia Soul
2005-2007 Kia Sportage (does not fit EX and LX Models)
2008-2016 Kia Sportage

2007-2012 Lincoln MKZ

2007-2010 Chrysler Sebring

1996-2014 Dodge Avenger
2007-2012 Dodge Caliber

1991-1999 Mitsubishi 3000GT
1992-2004 Mitsubishi Diamante
1995-2012 Mitsubishi Eclipse
2003-2006 Mitsubishi Lancer (5 lug Evolution & Ralliart only)
2008-2016 Mitsubishi Lancer
2004-2011 Mitsubishi Endeavor
2004-2016 Mitsubishi Outlander

2007-2016 Jeep Compass
2007-2016 Jeep Patriot

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x4.5
• Wheel Bolt Pattern: 5x4.5
• Hub Bore: 67.1mm
• Thread Pitch: 12x1.5
• Thickness: Each Spacer Measure .8" Thick

Vehicle Bolt Pattern: 5x4.5Titan Wheel Accessories