THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2007-2009 Chrysler Aspen

2005-2011 Dodge Dakota
2004-2009 Dodge Durango
2002-2010 Dodge Ram 1500

2006-2009 Mitsubishi Raider

2011 Ram 1500
2012-2013 Ram 1500 ( Need To Check Your Studs - Can Be Either a 9/16" or 141.5)

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x5.5
• Wheel Bolt Pattern: 5x5.5
• Hub Bore: 108mm
• Thread Pitch: 9/16" x 18
• Thickness: Each Spacer Measure 2" Thick

Vehicle Bolt Pattern: 5x5.5Titan Wheel Accessories