WARNING!!!For Proper Installation, it is REQUIRED that the back of your wheels have small cavities in the mounting pad, for proper installation of our 20mm wheel spacers These cavities are required so that the lugs and OEM wheel studs can sit in this pocket

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

1986-2001 Acura Integra

1982-1989 Honda Accord
1980-2005 Honda Civic
2007-2016 Honda Fit
2000-2014 Honda Insight

2002-2015 Mini Cooper (4 Lug Models Only)

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 4x100
• Wheel Bolt Pattern: 4x100 (4x100)
• Hub Bore: 56.1mm
• Thread Pitch: 12x1.5
• Thickness: Each Spacer Measure 20mm Thick

Vehicle Bolt Pattern: 4x100Titan Wheel Accessories