THESE ADAPTERS WILL BOLT UP TO THE FOLLOWING VEHICLES (WHEEL ADAPTERS WILL CHANGE YOUR BOLT PATTERN)

2005-2006 Saab 9-2X

2013-2016 Scion FR-S
2003-2006 Subaru Baja
2013-2016 Subaru BRZ
1998-2016 Subaru Forester
1995-2013 Subaru Impreza (not the WRX STi Models)
2014-2016 Subaru Impreza
1990-2014 Subaru Legacy
2005-2014 Subaru Outback
2013-2016 Subaru XV Crosstrek

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x100
• Wheel Bolt Pattern: 5x100
• Hub Bore: 56.1mm
• Thread Pitch: 12x1.5
• Thickness: Each Spacer Measure 1.50" Thick

Vehicle Bolt Pattern: 5x100Titan Wheel Accessories